System Preparation
We begin by shutting down your pool's filter system and lowering water levels for optimal access to tile surfaces
Tile Cleaning Near You
Our goal is to make your pool tile look new again. With Premier’s pool tile cleaning service, we will shut off your filter system (and auto-fill valve). Then, for us to see the calcium that needs to be removed, we drop the water level of your pool approximately 6″ below the bottom of the tile. The bead that we use is very fine to protect your tile, almost like a powder. However, the bead is heavy enough to fall to the bottom of the pool.
After we clean your tile, we vacuum the bead into a canvas bag for recycling. This vacuuming process removes 99% of the bead from the bottom of the pool. Sometimes, your pool water will look cloudy after cleaning, especially if we are cleaning rock. This will clear up in a couple of days after your system has been running. We recommend rinsing out your cartridge filter (the big filter) after a week or so.
Finally, we apply a polish to your newly cleaned pool tile. This polish will give the tile that “wet look” and your tile will shine like new. Keep in mind, that we cannot prevent calcium from coming back. The time it takes for the calcium to return will depend on how hard your water is, typically, 3-5 years. After we are finished, you will refill your pool. When your pool’s water level is back to normal, you will turn the system back on and reset the timers for the pool sweep, if needed.
Tile Cleaning- 01.
- 02.
- Tile Cleaning
Why Choose Premier For Tile Cleaning?
Find A Local Provider Lasting Results - Generally 3-5 years before calcium returns
Complete Care - Includes coping and waterfalls
Expert Repairs - Matching tile replacement
Trusted Process - Gentle and effective cleaning
Importance of Tile Cleaning
Pool tile differs from bathroom tile in that it is formulated to be frost-free, or manufactured to prevent water absorption. It’s made to be very durable, but over time, it can still chip and require repair. Broken pool tiles are extremely common and are relatively quick to fix. Once we replace the damaged tiles, it takes around two days for the grout to set up and dry.
Tile Cleaning
Tile Cleaning Process
Cleaning Process
Using ultra-fine protective beads, we safely remove calcium buildup from your pool tiles and surfaces
Professional Cleanup
Our vacuum system removes 99% of cleaning materials, followed by thorough area restoration
Final Polish
We apply a professional-grade polish for a lasting "wet look" finish that protects for 3-5 years
Additional Care
Service includes cleaning of pool coping, rock waterfalls, and surrounding areas
Post-Service
Expect temporary pool cloudiness for 1-2 days. Filter rinse recommended after one week
Frequently Asked Questions About Tile Cleaning
FAQS0
How often should tiles be cleaned?
Professional cleaning is generally recommended every 3-5 years, depending on water hardness.
0
Will cleaning harm my tile?
No, our fine-bead process safely removes calcium without damaging tile surfaces.
0
Do you repair broken tiles?
Yes, we offer matching tile replacement and repair services.
REPAIRS
Explore Our
Pool Cleaning Services
Discover how we can enhance your pool!
Transform Your Pool
Trust the Premier Difference
Attention to detail
Unmatched expertise
Personalized solutions
